Synthesis of Aluminum-Based Metal-Organic Framework (MOF)-Derived Carbon Nanomaterials and Their Water Adsorption Isotherm.

The characteristics of water vapor adsorption depend on the structure, porosity, and functional groups of the material. Metal-organic framework (MOF)-derived carbon (MDC) is a novel material that exhibits a high specific area and tunable pore sizes by exploiting the stable structure and porosity of pure MOF materials. Herein, two types of aluminum-based MOFs were used as precursors to synthesize hydrophobic microporous C-MDC and micro-mesoporous A-MDC via carbonization and activation depending on the type of ligands in the precursors. C-MDC and A-MDC have different pore characteristics and exhibit distinct water adsorption properties. C-MDC with hydrophobic properties and micropores exhibited negligible water adsorption (108.54 mgg-1) at relatively low pressures (P/P0~0.3) but showed a rapid increase in water adsorption ability (475.7 mgg-1) at relative pressures of about 0.6. A comparison with the isotherm model indicated that the results were consistent with the theories, which include site filling at low relative pressure and pore filling at high relative pressure. In particular, the Do-Do model specialized for type 5 showed excellent agreement.

Asymmetric Supercapacitors Using Porous Carbons and Iron Oxide Electrodes Derived from a Single Fe Metal-Organic Framework (MIL-100 (Fe)).

MOF-derived carbon (MDC) and metal oxide (MDMO) are superior materials for supercapacitor electrodes due to their high specific capacitances, which can be attributed to their high porosity, specific surface area (SSA), and pore volume. To improve the electrochemical performance, the environmentally friendly and industrially producible MIL-100 (Fe) was prepared using three different Fe sources through hydrothermal synthesis. MDC-A with micro- and mesopores and MDC-B with micropores were synthesized through carbonization and an HCl washing process, and MDMO (α-Fe2O3) was obtained by a simple sintering in air. The electrochemical properties in a three-electrode system using a 6 M KOH electrolyte were investigated. These novel MDC and MDMO were applied to an asymmetric supercapacitor (ASC) system to overcome the disadvantages of traditional supercapacitors, enhancing energy density, power density, and cyclic performance. High SSA materials (MDC-A nitrate and MDMO iron) were selected for negative and positive electrode material to fabricate ASC with KOH/PVP gel electrolyte. As-fabricated ASC resulted in high specific capacitance 127.4 Fg-1 at 0.1 Ag-1 and 48.0 Fg-1 at 3 Ag-1, respectively, and delivered superior energy density (25.5 Wh/kg) at a power density 60 W/kg. The charging/discharging cycling test was also conducted, indicating 90.1% stability after 5000 cycles. These results indicate that ASC with MDC and MDMO derived from MIL-100 (Fe) has promising potential in high-performance energy storage devices.

Development of a gliding arc plasma reactor for CO2destruction.

A gliding arc plasma reactor was designed to destruct carbon dioxide (CO2), which is a major greenhouse gas. To increase the CO2destruction rate with a high processing gas volume, an orifice baffle for gathering the gas flow at the centre of the electrodes was installed in the gliding arc plasma reactor. The CO2inflows with methane (CH4) and steam (H2O) improve the CO2destruction. The parametric studies have been made of the change of CH4 addition, gas injection velocity of the centre nozzle, change of CO2gas flow rate, and orifice baffle configuration. The produced gases were measured, and the data analysis has been achieved in determining the CO2destruction rate, CH4conversion rate, destruction energy efficiency, and selectivity for CO2and H2. The highest CO2 destruction rate for each parameter has been shown as follows: the CH4/CO2ratio is 1 as 40%, and the injection gas velocity is 69.5 m/s as 35.7%, the CO2flow rate is 5 L/min as 42.6%, and the orifice baffle is Type 1, which had the smallest internal area, as 35.7%.

Korea National Survey for Environmental Pollutants in the Human Body 2008: heavy metals in the blood or urine of the Korean population.

BACKGROUND: Recently, there have been several nationwide episodes involving imported toys contaminated with toxic metals and environmental hormones. In addition, cadmium intoxication has occurred due to soil contamination with cadmium from abandoned metal mines. OBJECTIVES: To investigate the distribution, extent and factors influencing the levels of toxic metals in the blood or urine of the Korean general population over twenty years of age, we studied the blood or urine concentrations of heavy metals in a representative sample of 5087 Koreans in 2008. METHODS: Multiple biological substrates were collected from each participant to determine the most suitable samples for an environmental health survey system. Information regarding exposure conditions of all subjects was collected by questionnaire-based interviews. RESULTS: The geometric means of the blood lead, mercury and manganese levels were 19.1, 3.23 and 10.8 µg/L, respectively. The geometric means of urinary arsenic and cadmium concentrations were 43.5 and 0.65 µg/L, respectively. Blood mercury and urinary arsenic levels in the Korean general population were significantly higher than in European and American populations. CONCLUSIONS: The higher levels of blood mercury and urinary arsenic could be explained by the greater seafood consumption among the Korean population. This biomonitoring study of blood or urine heavy metals in the Korean general population provides important reference data stratified by demographic and lifestyle factors that will be useful for the ongoing surveillance of environmental exposure of Koreans to toxic metals.